Electronics Drafting
CAD 1203
Spring 2008
Instructor: Mary Smith
Office: C102
Phone: (815) 224 - 0520
Email: Mary_smith@ivcc.edu
Text: Electronics Drafting ('01 Revision), Frostad, Goodheart-Wilcox ISBN # 1566378583)
Course Description: A course in techniques and general drafting with major emphasis on pictorial drawing, device symbol production drawings, flow and schematic diagrams, printed circuits, miniaturization, industrial controls, and graphic representation. Lecture, one hour per week; lab, two hours per week.
Attendence is Required: A student will be dropped after five unexcused absences. Roll will be taken at each session. Five extra credit points will be given to a student's final grade for perfect attendance.
Assessment: Students will be assessed with three tests and a final on
their understanding of the vocabulary and standards for the industry. Lab
assignments will be used to assess the students understanding of the industry
standards that pertain to electronic drafting. The final grade of the student
will be the sum of 35% of their lab assignments, 35% of their test average and
25% of their grade on the final.
Grading Scale:
100 - 90 A
89 - 80 B
79 - 70 C
69 - 60 D
59 - 0 F
Classroom Policies: Students are expected to respect others and the classroom setting. Please refer to the Student Code of Conduct as outlined in the Student Handbook
Drop Policy: Students wishing to drop the class will have to initiate the procedure. The instructor will not drop a student without student verification, unless student misses more then five classes. At the semester end, if a student has not dropped and has not completed the course requirements, a grade of F will be given. Final drop date is April 8, 2008. Please check with your counselor before dropping as it may affect your Financial Aid status
Special Needs: If you need support or assistance because of a disability, you may be
eligible for academic accommodations through the IVCC Special Populations Office;
Rm. B-204; Phone 815/224-0284.
Schedule of Assignments
|
Note: This schedule is tentative, and may be modified during the course of the semester at the discretion of the Instructor |
|||
|
Week |
Topic |
Reading |
Assignments |
|
January 14 |
Electronic Drafting/ Block and Single Line Flow Diagrams |
Pages 7 - 24 |
Page 29, Chapter 2- Activity 2 |
|
January 21 |
Martin Luther King Day/ College Closed |
||
|
January 28 |
Flow Diagrams and Electronic Symbols, Components and References |
Pages 25 - 41 |
Pg 29, Review Questions, Activity 4 9 Pg 31) |
|
February 4 |
Electronic Symbols, Components and References |
Pages 41 - 60 |
Chapter 3, Activities 1 - 3 |
|
February 11 |
Schematic Diagrams |
Pages 63 - 70 |
Schematic handout |
|
February 18 |
President’s Day/ College Closed |
||
|
February 25
|
Test #1 (Chapters 1-3) |
|
Open lab |
|
March 3 |
Schematic and Logic Diagrams |
Pages 70 - 82 |
Chapter 4, Activity 8 |
|
March 10 |
Wiring Diagrams |
Pages 83 -99 |
Chapter 5, Activity 1 |
|
March 17 |
Spring Break - No Classes |
||
|
March 24 |
Printed Circuitry |
Pages 103 - 130 |
Printed Circuit Board Handout |
|
March 31 |
Test #2 (Chapters 4 -6) |
|
Open lab |
|
April 7 |
Printed Circuit Boards |
Pages 131 - 142 |
Chapter 7, Review Questions |
|
April 14 |
Enclosure Drawings |
Pages 143 - 170 |
Chapter 8, Activitiy 1 |
|
April 21 |
Pictorial Drawings |
Pages 171 - 185 |
Chapter 9, Review Questions |
|
April 28 |
Test #3 (Chapters 7 – 9) |
|
Open lab |
|
May 5 |
Final Exam |
||
Useful Links for Students